E40C-1200-6
Specifications:
|
Temperature &Humidity range |
40℃, <1%RH |
|
Display precision |
±1℃, ±3%RH |
|
Outside dimension |
W1200*D840*H1820mm |
|
Inside dimension |
W1144*D576*H1487mm |
|
Capacity |
980L |
|
Shelves |
5 units |
|
Color |
black |
|
Voltage |
110V/220V (select voltage in advance) |
|
Power consumption |
Ave. 600Wh; Max. 1200W |
|
Structure |
1mm thick carbon steel with antistatic paint |
|
Door |
Handles, airtight magnetic sealers and reinforced glass |
|
Wheels |
Four 3″wheels, two of them with brake |
|
Grounding wire |
1MΩ（940mm long） |
|
ESD Paint |
106--109Ω(surface resistance) |
Baking 40℃ dry cabinet is suitable for ambient temperature >15℃.
Two main functions:
-Wider application in resetting the floor life: Moisture sensitivity SMD packages which are exposed to the air and exceed the floor life should be stored in the E40C series for resetting the floor life.(see J-STD-033 ). For example, If MAD parts of MSD level 4, 5 and 5a are exposed for less than eight hours, they can be stored in a dry cabinet for resetting the floor life. However, if their exposure time is longer than eight hours, the SMD packages should be stored at 40℃ in a E40C series to reset the floor life.
-Labor saving: SMD packages shipped in low temperature carriers may not be baked in a traditional high temperature over the temperature higher than 40℃, as it will cause deformation of the carriers. Storing in E40C series, operators do not need to remove the SMD packages to thermally safer carriers. It saves labor cost and eliminates the chance of damaging the carriers.
Features:
-Modular design: This is a modularly designed dry cabinet. The main modules are display controller, power box, dehumidifier, shelf, caster wheel and cable. All of the modules can be replaced easily.
-Green design: The performance of the dry cabinet can be upgraded by just changing the modules. There will be no waste materials created to pollute the environment. The old modules can be collected and sent back to the maker. Dryzone dry cabinets can be used as long as the cabinet structure is in good condition. It means that the product life could last for 10-20 years.
